Bookmark this page | Homepage | Casual look | Mobile version | 如有业务需要请点击QQ咨询如有业务需要请点击QQ咨询Skype ConsultingSkype Consulting

P&G (Guilin) Industrial Co. Ltd.


  • No Category

  • Contact:Mr.Liao Peijing
  • Phone:0551-62864156-606

riends links
  • No link
Your current location:Home » Product supply » CNC Vertical Machining Center (MCV)
CNC Vertical Machining Center (MCV)
Click image to view full size image
Product: Views:3CNC Vertical Machining Center (MCV) 
Unit price: Negotiable
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2016-12-06 19:41


Directly Coupled Servo Motors
The MCV Series servo motors are connected to the ball screws with rigid shaft couplings. These couplings ensure that even under severe loading from sharp corner machining, precise interpolation is achieved. This design is superior to both and flexible shaft coupling designs.

Chip Removal
Simple and efficient design uses chip augers on both sides of the machine and provides high volume coolant to wash the chips from the work area. The augers move the chips into the disposal container, which eliminates the need for an operator to manually remove chips. This system eliminates operation intervention and reduces non-cutting time.

Double nut designed ball screws
We use only premium quality preloaded double-nut ball screws from THK, IBU STAR and HIWIN. On the V/ MV/ MCV-Series machines each ball screw is accurately aligned parallel to the guide ways and anchored at both ends. They are then pre-tensioned to improve machine stiffness. The rotational torque variation is inspected to guarantee a non-binding, highly accurate, and long running component. With this design the MCV Series can exceed customer requirements for accuracy and maximum life.

Swivel Operator Panel
The operator panel swivels for better operator convenience.

Cast Iron Construction
We uses only top quality well-ribbed castings. Finite Element Analysis (FEA) is used on each new casting to determine the size and location of all internal ribs ensuring high torsional stiffness and minimum vibration. The cast iron base column, saddle, headstock, & tables have over 10 times the dampening capacity of those made from steel resulting in superior cutting performance.

Heavy-Duty Box Ways
The heavy-duty box ways are hardened to HS67-75 {HRC 50-60) and precision ground. The female box ways and gibs are coated with anti-friction Turcite-B. These features help allow the machine to maintain maximum accuracy levels.

Cartridge Type Spindle
The heavy-duty spindle utilizes FAG or NSK ABEC-7 bearings to allow heavy cutting. Oversized disk springs used to hold the tool in the spindle are tested for long life. The high retention force of the springs reduce tool movement, improve tool life, allow heavier cutting, reduce chatter, & create a better part finish. This spindle is prepared to easily add the CTS option.

Rigid Tapping
The encoder is directly attached to the high-performance spindle motor. The spindle is then synchronized with the Z-axis motion. This synchronization eliminates the need for expensive floating tap holders and prevents thread distortion and thread pullout.

Ball Bar Testing
We use a stringent ball bar test that checks not only linear accuracy but also machine geometry. This test insures that each machine meets the three-dimensional squareness and accuracy requirements.

MCV1100i  MCV1300  
CAPACITY  Unit  Drum type  Arm type  Drum type  Arm type  
X axis travel  mm(in)  1100(43.3)  1300 (51.1) 
Y axis travel  mm(in)  635(25)  635 (25)  
Z axis travel  mm(in)  445+165
610(24)  445+165
610 (24)  
Distance from spindle nose to table surface  mm(in)  125-570
Distance from spindle nose to column surface  mm(in)  622(24.4)  622(24.4)  
Table size (L×W)  mm(in)  1120610(44x24)  1420610(56x24)  
Max. table load weight  kg(lb)  1000(2200)  1000(2200)  
T-solt size   18TxP100x6  18TxP100x6  
Spindle speeds  rpm  4000  4000  
Spindle nose (nominal size, No.)   7/24 Taper , No.50  7/24 Taper , No.50  
Spindle bearing inner diameter  mm  90 (3.54)  90 (3.54)  
Rapid traverse X,Y/Z  m/min
20 (787)  20 (787)  
Max. cutting feedrate  m/min
10(393)  10(393)  
Tool storage capacity  pcs  20  24  20  24  
Max. tool diameter(with adjacent tools)  mm(in)  95(3.7)  75(2.9)  125(4.9)  125(4.9)  
Max. tool length  mm(in)  250(9.8)  250(9.8)  300(11.8)  
Tool change time (T-T/C-C)  sec  7.5/13  3/10  15/20  3/10  
Spindle motor(30min/cont)FANUC  kw(HP)  11/15(14.7/20.1)  11/15(14.7/20.1)  
X,Y/Z axis motor  kw(HP)  3/3/7 (4/4/9.3)  3/3/7 (4/4/9.3)  
Height of machine(H)  mm(in)  3100(122)  3100(122)  
Floor space(L×W)  mm(in)  35703600(140.5x141.7)  35703600(140.5x141.7)  
Total machine weight  kg(lb)  7250 (15950)  7250 (15950)  
Power requirement  KVA  30  30  
Computer control  FANUC  0i-MC  0i-MC  

More Product Features


(c)2015-2016 All Rights Reserved